2281 Multipoint Switch

0
0

Shop


2281 Multipoint Switch

The Multipoint Switch is based on the conductivity principle and can be applied to liquids with conductivity higher than 10 μS/cm. The probes has to be immersed into the tank for detecting the level. The probe length should be in accordance with the level to be detected. Filling liquid in the tank will change the electrical conductivity between the reference probe and probes. The established connection will be converted and will activate a relay providing for output.


Advantages:

  • Fast installation due to 2 to 4 individual switching points integrated in one sensor
  • Easy on site probe length configuration
  • Up to 4 relays for pump and valve control
  • Adjustable sensitivity
  • Adjustable delay time

Fields of Application:

  • Pump control
  • Chemicals
  • Potable water
  • Cooling water

Standards:

  • CE
  • RoHS Compliant

Level:

  • Conductive Principle
  • Relay Output: 1 or 2 SPDT
  • Power Supply: 24V…240V AC or DC 24V AC/DC
  • Max. voltage rating 250V AC1, 24V DC
  • Probes: 2,3,4 + 1 Reference
  • Electrode Material: Stainless Steel 1.4571
  • Electrode Length: 0.5, 1.0, 1.5 m (max. 3 m)
  • Electrode Seperator, Material PP ( KLP-201)