Type 104 Electrically Actuated Ball Valve

0
0

Shop


Type 104 Electrically Actuated Ball Valve

The Type 104 Ball Valve shall be true union and utilize a floating ball design.  The actuator shall be a single voltage with a manual override.  Two-position switches for feedback shall be standard.  The ball shall be fully molded and full port with two-way block-ing capability.  The stem shall be blowout proof, utilizing a double o-ring seal and a predetermined break point opposite the media side of the stem seals.  The seat carrier shall be adjustable and reverse threaded.  The handle shall double as a seat carrier adjustment or removal tool.  The valve nut threads shall be of buttress type.  Ball seats shall have an elastomeric backing o-ring and all elastomeric seals shall be of like material.  ANSI flanged versions shall meet ANSI B16.5 150lb standards.  All valves shall be tested in accordance with ISO9393 and designed to ISO16135 standards.  All valves shall be manufactured under ISO9001 for Quality and ISO14001 for Environmental Management.  Following assembly, every valve shall be tested and certified bubble-tight exceeding Class VI standards.


General:

•    Size: ½”–2”
•    Material:  PVC, CPVC, ABS
•    Seat:  PTFE
•    Seals:  EPDM or FPM
•    End Connection:  Solvent cement socket, threaded
•    Actuator Housing: Polyamide
•    Voltage:  110 VAC, 220 VAC, 24 VDC
•    Duty cycle:  75%
•    Limit Switches: Two SPST 5A


Optional Features:

•    Voltage: 12VAC, 12VDC, or 24VAC
•    End Connection: Flanged

Key Certifications:

•    NSF 61: PVC and CPVC
•    FDA CFR 21 177.2600: EPDM and FPM
•    FDA CFR 21 177.1550: PTFE
•    USP Class VI (physiological non-toxic): EPDM, FPM and PTFE
•    ABS: All materials