Model S80 Nitrite Ion Sensors

0
0

ISE analyzers


Model S80 Nitrite Ion Sensors

The Model S80 universal sensors provide a stable and economical platform for the in line measurement of pH, ORP, Specific Ion, Dissolved Oxygen, Conductivity or Resistivity. The Model S80 is an insertion or immersion style sensor for use in pipe Tees or on the end of a Stand Pipe for immersion into a tank or pond. The Model S80 is also available as a valve retractable design allowing insertion or removal of the sensor into a pipe without interrupting the process flow. Both sensor designs use easily replaceable electrode cartridges. ECD offers several ion selective electrode cartridges suitable for continuous online measurement.

The Nitrite Ion Electrode is a combination electrode with a sensing element made of a PVC membrane containing an ion exchanger and a double junction reference electrode. The Nitrite Ion Selective Electrode cartridge develops a millivolt potential proportional to the concentration of nitrite ions in the measured solution. The typical output is 50mV to 60mV per decade of change in concentration. The speed of response varies from a few seconds in concentrated solutions up to a few minutes in the lower ppm ranges. The Nitrite Ion sensors are used with theModel T80 Transmitter with its dual channel mix and match capabilities. These analyzers will measure nitrate ions from 0.05 ppm to 200 ppm autoranging the display
between the ppb, ppm and ppt (parts per thousand) scales.

Features

  • Model S80 Universal Style Sensors
  • Multiple materials of construction
  • Integral Signal Conditioner
  • Replaceable Electrode Cartridge
  • Dual Channel Analyzers, pH/pION, pION/pION

Benefits

  • Insertion, Immersion or Valve Retractable Service
  • 316 Stainless Steel, Titanium, Hastelloy
  • Noise free transmission
  • Simple and Economical Service
  • Mix and match your choice of measurements

Fields of Application:

•    Wastewater Treatment
•    Chemical Manufacturing/Addition

 


Standards:

  • CSA
  • FM
  • NEMA
  • UL
  • CE Mark

Model S80 Nitrite Ion Sensors:

The Nitrite Ion Electrode is a combination electrode with a sensing element made of a PVC membrane containing an ion exchanger and a double junction reference electrode. The Nitrite Ion Selective Electrode cartridge develops a millivolt potential proportional to the concentration of nitrite ions in the measured solution. The typical output is 50mV to 60mV per decade of change in concentration. The speed of response varies from a few seconds in concentrated solutions up to a few minutes in the lower ppm ranges. The Nitrite Ion sensors are used with theModel T80 Transmitter with its dual channel mix and match capabilities. These analyzers will measure nitrate ions from 0.05 ppm to 200 ppm autoranging the display
between the ppb, ppm and ppt (parts per thousand) scales.