Model S80 Fluoride Ion Sensors

0
0

Analyzers


Model S80 Fluoride Ion Sensors

The Model S80 universal sensors provide a stable and economical platform for the in line measurement of pH, ORP, Specific Ion, Dissolved Oxygen, Conductivity or Resistivity. The Model S80 is an insertion or immersion style sensor for use in pipe Tees or on the end of a Stand Pipe for immersion into a tank or pond. The Model S80 is also available as a valve retractable design allowing insertion or removal of the sensor into a pipe without interrupting the process flow. Both sensor designs use easily replaceable electrode cartridges. ECD offers several ion selective electrode cartridges suitable for continuous online measurement.

The Fluoride Ion Selective Electrode cartridge develops a millivolt potential proportional to the concentration of free fluoride ions in the measured solution. The model S80 Fluoride Ion sensors are used with the Model T80 Transmitter with its dual channel and pH compensation capabilities. These analyzers will measure free fluoride ions from 0.02 ppm to 2,000 ppm in the op0mum pH range of 5-8 pH. Outside this pH range, large errors will occur in the acid range and small errors will occur in the alkaline pH ranges.

Features

  • Model S80 Universal Style Sensors
  • Multiple materials of construction
  • Integral Signal Conditioner
  • Replaceable Electrode Cartridge
  • Available for pH compensation

Benefits

  • Insertion, Immersion or Valve Retractable Service
  • 316 Stainless Steel, Titanium, Hastelloy
  • Noise free transmission
  • Simple and Economical Service
  • Wide range of serice from 2 pH to 8 pH

Fields of Application:

•    Wastewater Treatment
•    Chemical Manufacturing/Addition

 


Standards:

  • CSA
  • FM
  • NEMA
  • UL
  • CE Mark

Model S80 Fluoride Ion Sensors:

The Fluoride Ion Selective Electrode cartridge develops a millivolt potential proportional to the concentration of free fluoride ions in the measured solution. The model S80 Fluoride Ion sensors are used with the Model T80 Transmitter with its dual channel and pH compensation capabilities. These analyzers will measure free fluoride ions from 0.02 ppm to 2,000 ppm in the op0mum pH range of 5-8 pH. Outside this pH range, large errors will occur in the acid range and small errors will occur in the alkaline pH ranges.