Type 065 Lug Style Butterfly Valve

0
0

Shop


Type 065 Lug Style Butterfly Valve

The Type 065 shall be a lug style butterfly valve rated for bidirectional use and dead-end service. The disc material shall be PFA encapsulated stainless steel. The disc and shaft shall be single-piece stainless steel and blow-out proof. The disc liner shall be constructed of virgin PTFE material with a minimum thickness of 3mm, mechanically interlocked with the core. All PTFE seals shall utilize a nonwetted elastomeric backing. The body shall be of a two-piece design, constructed of ductile iron with a polyester coating. The shaft bearings shall be self-lubricating. Flange bolt patterns shall comply with ANSI B16.5 class 150 standards. All valves shall be cleaned and double bagged in a class 10,000 cleanroom. All valves shall be rated for bubble-tight shut-off.


General:

    Size: 2”-14”
•    Max Pressure: 232 psi (2”-6”), 150 psi (8”-12”), 90 psi (14”)
•    Clean: High purity
•    Disk: PFA overmoulded stainless steel (2”-12”)
•    Body Material: Polyester coated ductile iron
•    Shaft: Stainless Steel
•    Liner: PTFE
•    Backing Material: FKM
•    Body Style: Lug
•    Connection: ANSI 150
•    Operation: Lever, gear

 

Key Certifications and Compliance:

•    CE: Pressure Equipment Directive 2014/68/EU (PED) appendix 1 for fluids of the groups 1 and 2.
•    SIL: IEC 61508 / 61511, Safety Integrity Level SIL 3.
•    FDA and EC 1935/2004: The Teflon® used for the Type 065 is in compliance with FDA and EC 1935/2004.