Type 369 Wafer Check Valve

0
0

Wafer Check Valve


Type 369 Wafer Check Valve

The Type 369 Check Valve shall be of wafer style, compatible with both flat and serrated flange adapters, and suitable for both vertical and horizontal mounting.  The face seal shall be a Q-ring and the port seal shall be an O-ring.  The body shall be machined and the disk shall be molded.  The alignment eye bolt shall be 304 stainless steel.  All valves shall be tested in accordance with ISO9393 and designed to ISO16137 standards.  All valves shall be manufactured under ISO9001 for Quality and ISO14001 for Environmental Management.


General:

    Size:  1½”–12”
•    Material:  PVC, PP, PVDF
•    Seals:  EPDM, FPM
•    Mounting:  Suitable for vertical and horizontal mounting
•    Connection: Both ANSI 150 and DIN 2501


Optional Features:

•    Spring:  316 SS or Hastelloy C
•    Cleaned: Silicone-free
•    Size: 14”-24” available upon request
•    Seals: Alternative materials available upon request

Important Note:

This is not a full port valve. The opening angle is between 70-90%.